We manufacture a wide range of parts to suit all applications. Our core business is making special parts to customer specifications and we are happy to make anything from a single tip to quantities in excess of 5,000 off in a wide choice of grades.
Large stock of standard tips including:
BHMA Imperial Rectangles
Round Nose No. 10 – 36
Turning No. 40 – 84
Bar Turning No. 100 – 123
Turning & Facing No. 190 – 218
Parting No. 260 – 268
Round Nose Facing No. 430 – 434
Round Nose No. 490 – 494
Knife No. 2130 – 2157
Drill Tips type C517/86 – 69 (Ø1/8” – Ø1¼”)
Reamer tips No. 520 – 528
Centre Tips No. 2600 – 2606
Spotfacing No. 3600 – 3622
ISO Metric A to E
Workrest Blades
A large part of our business is making tips to customer drawings or sketches. We endeavour to incorporate as much of the finished detail into the blank as possible, thereby reducing the finish machining costs. In addition, we are able to offer grinding services in our comprehensively equipped tool room.
We pride ourselves on industry beating lead times. Blanks in 2 to 10 days and finished parts in 7 to 14 days are habitually achieved for this type of work.
We stock a wide range of strip, rod & balls available for same day despatch. These can be cut to suit your requirements. Specials are made to order and supplied either as sintered or ground within the following ranges:
Strip up to 305mm long
Plate up to either 305 × 105mm or 255 x
170mm from 2mm up to 35mm thick
Rod up to Ø40 × 305mm long
Precision ground balls up to Ø30mm
We stock the 2600 range of standard male centre tips from Ø3/16” up to Ø1”. We can offer a quick delivery on special centres as either tips or solid bodies and can include such features as through coolant,
morse taper shank, etc…
We pride ourselves on industry beating lead times. Blanks in 2 to 10 days and finished parts in 7 to 14 days are habitually achieved for specials.
We manufacture a wide range of fluted blanks from Ø5 up to Ø80mm. These can take the form of slug ends or solid blanks and can incorporate any of the following features:
Body – stepped diameters, tapers, profiles & undercuts
Flutes – any number, profile & angle in left & right hand spiral
Coolant Holes – any straight coolant holes
Shank – parallel or Morse taper including tangs and cross holes
Work holding – male, female & protected centres
In addition, we stock a wide range of reamer slugs from ؼ” up to
Ø1¼” with 10° left hand spiral / right hand cutting to make or
refurbish standard reamers.
We pride ourselves on industry beating lead times. Blanks in 1 to 2
weeks and finished parts in 3 to 4 weeks are habitually achieved for
this type of work.
We manufacture custom router and saw tips to your specification in a wide range of grades to suit the application. We are happy to supply 1 off to over 5000 off with die sets normally being used for larger quantities.
We pride ourselves on industry beating lead times. Smaller quantities in 2 to 10 days and larger quantities in 7 to 14 days are habitually achieved for this type of work.
We manufacture a wide variety of nozzles for different industries which are usually made to customer drawings. These can be either solid carbide or carbide inserts glued into steel or aluminium bodies. When worn, these inserts can be replaced making these a very economical choice for production machines.
We pride ourselves on industry beating lead times. New nozzles in 1 to 3 weeks and refurbished nozzles in less than 1 week are habitually achieved.
We make blade blanks in all shapes and sizes as thin as 1mm. We can often supply with any mounting holes or slots sintered into position. Where tolerances are finer, we can either supply with wire start holes or wire them for you.
We can also finish grind thicknesses down to 0.25mm in our comprehensively equipped toolroom.
We pride ourselves on industry beating lead times. Blanks in 1 to 2 weeks and finished parts in 2 to 4 weeks are habitually achieved for this type of work.
We have extensive experience in developing solutions to overcome wear problems. From dies to guide rails, carbide facing in critical areas increases productivity by reducing maintenance down time.
We pride ourselves on industry beating lead times. Blanks in 1 to 2 weeks and finished parts in 2 to 6 weeks are habitually achieved for this type of work.
Whatever the job, we can normally produce a blank to suit your needs. From a simple bush for a plug gauge, to intricate multi faceted blanks with holes, keyways, undercuts, etc… simply send us your finished drawing and together we can agree on the most suitable blank.
Additionally, we have a comprehensively equipped tool room that can satisfy most finish grinding requirements.
We pride ourselves on industry beating lead times. Blanks in 2 to 14 days and finished parts in 7 to 21 days are habitually achieved for this type of work.
